DESCRIPTION

The ValueRAM's KVR24N17S8/8 is a 1G x 64 - bit (4GB) DDR4-2400 CL17 SDRAM(Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDRA-2400 timing of 17-17-17 at 1.2V. Each DIMM used gold contact fingers. The electrical and mechanical and mechanical specifications are as follows

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die terminations (ODT) for data, strobe and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generations and calibration
• Single-rank
• On-board 12 serieal presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23" (31.25mm)
• RoHS Compliant and Halogen-Free

SPECIFICATIONS

• CL(IDD)
  • 17 cycles
• Row Cycle Time (tRCmin) 
  • 45.75ns(min.)
• Refresh to Active/Refresh Command Time(tRFCmin)
  • 350ns(min.)
• Row Active Time (tRASmin)
  • 32ns(min.)
• Maximum Operating Power
  • TBD W*
• UL Rating
  • 94 V - 0
• Operating Temperature
  • 0° C to +85° C
• Storage Temperature
  • -55° to +100° C